High oil temperatures are a prominent issue in the FA motor family found in the first and second generation vehicles. High stress conditions such as track usageautocrossor hot ambient temperatures will often result in high oil temperatures. In our testing of the second generation vehicleswe have seen oil temperatures as high as 280F on a stock vehicle. As we move closer to summerwe expect oil temperatures to increase even further as we see some 100F+ ambient temperature track days.

We’re proud to announce the first Oil Cooler Kit available for the 2022+ Toyota GR86 and Subaru BRZ chassis.  

The ColorFittings Arctic Competition Oil Cooler Kit is engineered to provide efficient oil cooling while maintaining OEM quality and reliability.  This is a direct bolt-on kit and does not require any modification for install. The included Mocal thermostatic sandwich plate prevents overcooling and assists in the warm-up process. Our pre-assembled AN lines are built to-length with our proprietary AN Fittings that allow for an easy and leak-free installation in addition to providing a very unique finish.

Installation Video Available Here

Our kit contains: 

• (1) Setrab Series 9 15 Row Oil Cooler Core
• (1) Mocal Thermostatic Oil Filter Sandwich Plate
• (2) Sandwich Plate Adapter Fitting
• (2) Oil Cooler Core Adapter Fitting
• (2) Pre-Assembled Chassis-Specific 10 AN line
• (2) Chassis-Specific Mounting Bracket
• (1) M6 Mounting Hardware Kit
• (1) OEM Oil Filter 

FAQ

Can I DIY Install this kit?

Our kit is intended to be as DIY friendly as possibleand most people with a moderate DIY skillset can confidently install our kit.  We include detailed instructions and illustrations with every kit.  

Will I need to cutgrindtrimdrillor otherwise make modifications to the vehicle for the install?

No. The kit is 100% bolt-on and requires no modification to the vehicle itself to install.

What should I expect a shop to charge for installing this kit?

Shop rates vary based on locationbut recommended book time is 3 hours.  Non-performance shops who are not familiar with AN fittings and line should still be able to install the kit without issuebut may choose to charge more than recommended. 

Do I need to install an oil cooler?

It is highly recommended for vehicles that see track usageautocrosshot ambient temperaturesforced inductionor sustained high RPM to install an oil cooler to protect the engine and prolong oil life.

Is the OEM Oil Cooler sufficient for track usage?

The OEM system is a coolant to oil heat exchanger located right below the oil filter on the top of the engine.  This system is designed to transfer excess heat from the engine oil to the engine coolant using a very small core.  We have found this system to be insufficient for proper oil cooling and does not maintain low oil temperatures during track usage.  The OEM oil cooler is removed during the installation of this kit.

What testing has been done with the kit?

Our preliminary testing was done with several stock drivetrain vehicles on Northern and Southern California road racing tracks.  Both the BRZ and GR86 were used in testing. Under these conditionswith the OEM oil cooleroil temperatures were measured at 280F at 70F ambient temp. With our oil cooler kittemperature drops were seen up to 55F and never exceeded 240F. 

Is this oil cooler thermostatic?

By defaultwe include a thermostatic Mocal sandwich plate.  The plate restricts flow to the core during warm-up to prevent overcooling of the oil and assists in the warm up cycle. It is highly recommended for all street vehicles to run a thermostatic oil coolerwhich is why we don’t offer a non-thermostatic option. 

What core is used in the kit?

The core used in our kits is a Setrab ProLine Series 9 15 Row Oil Cooler.  Setrab has a very strong track record in oil cooling products.  This core was chosen for its durable constructionreliabilityand cooling efficiency.  

Do I need to drain the engine oil out of the core every oil change?

It is not necessary to drain the engine out of the core and line every oil changebut some customers may choose to do so.  If performing this stepplease ensure that all mounting hardware and AN lines are torqued correctly after each service. 

Should I adjust the oil change interval?

We recommend an oil change interval adjustment based on the operating conditionsvehicle usageand specific oil used.  The best way to determine the correct oil change interval is to check the oil with a used oil analysis service. 

Does this increase the oil capacity of the engine?

The core and lines will increase the oil capacity of the engine by approximately 0.8L.  Unless the core and lines are drained with each oil changethe capacity of oil necessary to refill the engine during an oil change service will remain the same.